Assembling Brewing and Distillation Equipment

This video covers bending tabs on the boiler, shaping it, and securing it with copper rivets.

This video covers soldering the boiler wall seam and soldering the bottom into the boiler.

This video covers soldering the vapor cone and attaching the vapor cone to the boiler. It also covers building the cap plate and cap skirt assembly for the column and condenser. Note, if you have a 1 gallon kit, the process will be slightly different. See this guide for a few additional steps. Come back to this page and continue with the videos to finish the 1 gallon still after reading the 1 gallon guide.

This video covers installing the collar to the top of the vapor cone and soldering the entire column.

This video shows the construction of a Clawhammer proofing parrot.

This video shows the build process for our 1 gallon copper moonshine still.

This video shows me building a 5 gallon copper distiller using a Clawhammer kit. Making the still took roughly 3 hours, but was condensed down to a bit less than 4 minutes for this time lapse video.